If you’re looking for a Zwave freezer sensor, then you’ve come to the right place. This blog post will tell you everything you need to know about the Zwave freezer sensor, including what it is, how it works, and where to buy it. So, if you’re looking for a Zwave freezer sensor, then you’ve come to the right place.
Best 10 Zwave Freezer Sensor
- TEMPERATURE SENSOR: Monitor air temperature in every room to get the most of your smart thermostat (sold separately). Make your home more comfortable with precise data sent by this smart sensor. Z-Wave hub required (sold separately, scroll down for compatibility).
- HUMIDITY SENSOR: Increase the air quality of your bedroom or home office with humidity level reports you can use to trigger your smart humidifier (sold separately). Stay in full control of the environment you spend the most time in.
- DISCREET & SECURE: Enjoy the minimal design of this device and extra small size that will help it blend into any interior. It comes with the 700 series Z-Wave chip offering longer range, better battery life, and the highest level of S2 security with SmartStart for fully encrypted communication.
- OUTDOOR BRACKET AVAILABLE: The sensor is coated with rubber oil protecting it against corrosion and water leak damage. You can mount the sensor outdoors under eve (no direct sunlight or rainfall) with the recommended mounting bracket (sold separately, ask Zooz about it).
- Z-WAVE COMPATIBILITY: Supported by open Z-Wave systems only, including Home Assistant (Z-WaveJS), HomeSeer, and Hubitat. Compatible with SmartThings. Ring Alarm supports temp monitoring only (no settings or humidity reports). NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT. If the sensor isn't working for you, it's likely that your hub doesn't support the new 700 series Z-Wave. This sensor is Z-Wave Plus certified. Contact Zooz tech support with questions or issues 7 days a week!
- ADVANCED TECHNOLOGY AND PRECISION: Easily to install sensor with 36in probe to quickly detect leak under sinks, behind refrigerators etc. before they turn into expensive repairs.
- FREEZE SENSOR: It triggers at 41◦F (5◦C) to notify you before a pipe freeze condition occurs or use it to tell your Z-wave thermostat to turn on/up the heat.
- BATTERY LIFE: Five year battery life on one CR123A lithium battery.
- ECOLINK: Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing and home automation devices.
- Remote Monitor & Alert: Freezer thermometer needs to work with MOCREO Hub(B08V555LXZ), through the Hub access to the network, you can know the temperature data from a Sensor in the home in real-time by the MOCREO App. The push notification will be sent to your phone or mailbox, once the temperature is out of preset range.
- Wider Applications: Wireless refrigerator thermometer with an external waterproof probe to monitor the temperature to ensure a stable connection and low temperature-resistant. The temperature working range can reach: -40°F to +257°F (-40°C to +125°C). Perfectly suitable for monitoring refrigerator/freezer.
- Long Battery Life: Chargeable. Adopted with low-power consumption connection technology, the battery lasts more than 2 years from a single full charge.
- Easy to Use: Add it to your MOCREO Hub as same as other MOCREO sensors and work together. Easily build your MOCREO system. Cares what you care for.
- Data Storage/Export: With data logger/storage on the MOCREO Cloud. Data history turns into a curve graph, offering you a clear data-changing track. Visualize the data.
- DON'T TRY THIS WITH WiFi! Our unique LoRa-based sensors are different from WiFi, Zigbee, Z-Wave and most other wireless smart sensors in that they are extreme long-range (up to 1/4 mile open-air), low-power (years between battery changes), and work outdoors*, on other floors, and even in a metal box (like a fridge or mailbox)!
- MONITOR & MANAGE your temperature and humidity concerns, whether it's a fridge or freezer, a barn or bedroom, a chicken coop or a dog kennel, a plant nursery or your child's nursery - anywhere! *Consider one of our weatherproof sensors, designed for outdoor use
- ECONOMICAL SMART FRIDGE! Save thousands when you make ANY fridge smart (or smarter) with YoLink smart sensors. Start with temperature sensors, then add door/lid sensors, leak sensors and a Power Fail Alarm.
- PLUG, PLUG & PLAY! Take advantage of direct ethernet connection and be online almost instantly when you plug your Hub into your router or network switch. Or, use hot spot mode to connect to your WiFi network in moments. Add devices in seconds using our Scan & Play QR code scanner in the app! Set your notification preferences, test your new sensors, then enjoy years of trouble-free operation!
- KNOW NOW! You have many options for being notified of device activity! Receive a text, receive an email, receive a phone push notification (including Apple phone "Critical Alert" severe weather/Amber alert type notifications that will activate your phone even if in silent mode. Android phones offer similar functionality, depending on phone manufacturer). SMS messages are limited to the total of 5 times each device plus 5. A hub and two sensors provides you with 20 free SMS per month.
- Wireless, battery powered, Z-Wave temperature and humidity sensor
- Super-small at 1.38 inches. It can be installed almost anywhere you need to measure temperature and humidity, and analyse some attributes of air health.
- ✽【NOTES】An Aqara Hub is required and sold separately. Requires a secured 2. 4 gigahertz WiFi network connection. The Aqara M2 or M1S Hub can connect up to 128 devices(*use of a repeater such as the Aqara Smart Plug or Aqara Smart Wall Switch(With Neutral) is required).
- 【REMOTE MONITORING】When the room temperature reaches above or below a certain threshold, the Aqara Temperature and Humidity Sensor can send a push alert to your phone or trigger the Aqara Hub night light.
- 【HOME AUTOMATION】The Aqara Temperature and Humidity Sensor can control other connected devices such as Aqara Smart Plug to ensure that your fan or humidifier maintains a constant level of comfort for you and your family.
- 【ACCURATE MEASUREMENT】Utilizes high-quality sensor from the industry-leading manufacturer, Sensirion.
- 【BUILT-IN AIR PRESSURE SENSOR】Monitors the ambient air pressure in the room. In addition, If you have any questions, please feel free to contact us.
- 【Remote Real-time monitoring】SNZB-02D sensor will monitor the temperature and humidity in real time on the APP remotely or display screen, with up to 120m/400ft coverate.
- 【High Accuracy & 5s Fast Refresh】Built-in Swiss-made smart hygrometer sensor that gives you more accurate readings maintaining ±0.2°C/±0.4°F accuracy in temperature and ±2%RH accuracy in humidity, refreshes readings every 5 seconds.
- 【Large LCD screen display】Use large LCD display to view the real-time values of temperature humidity clearly and dynamically, the intuitive display icons let you check the room conditions and battery status even easier than ever.
- 【App notifications】You’ll receive instant alerts from your phone when the temperature or humidity exceeds your set comfort level.
- 【Data Storage & Export】Up to half-year free cloud storage, and most accurate enough to view hourly data, you can also check the highest and lowest values at any hour or day and data can be exported as files.
- 24/7 PROTECTION: Turn your water on/off from the app manually, or Flo by Moen Smart Water Shutoff will automatically turn off the water for you to protect the home from catastrophic water damage
- DAILY LEAK TESTING: MicroLeak Technology proactively monitors the security of the home's entire water system (including behind walls and in foundations) to identify leaks as small as a drop per minute (e.g. pinhole leaks, etc.)
- APP DASHBOARD: See how much water you're consuming daily and set conservation goals to encourage saving water and money for your home
- SIZE: Model 900-001 fits 3/4-Inch to 1-1/4 Inch pipe diameter (consult a professional)
- COMPATIBLE WITH: Alexa skills and Google Assistant; no smart hub or system required; requires Wi-Fi connection; requires standard AC/DC power connection
- 6-in-1 Z-Wave Plus multi-sensor: motion, humidity, temperature, light lux, UV, vibration sensor
- Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in recessed downlight fitting
- 700 Series Z-Wave MultiSensor: This is the next generation MultiSensor to the best selling Aeotec MultiSensor 6
- Batteries Included: Use wirelessly with the included batteries or power permanently with the included USB power cable
- Remote monitor&alert: Through the Hub access to the network, you can know the temperature data from a sensor in the home in real-time through the MOCREO app when you're not at home. The push notification will be sent to your phone or mailbox, once the temperature is out of preset range.
- Wider Applications: With an external waterproof probe to monitor the temperature to ensure a stable connection and low temperature-resistant. The temperature working range can reach: -40°F to +257°F (-40°C to +125°C). Perfectly suitable for monitoring refrigerator/freezer. No problem with water temperature monitoring also.
- Long battery life: Chargeable. Adopted with low-power consumption connection technology, the battery lasts more than 2 years from a single full charge.
- Stable Connection: Our refrigerator thermometer has a line of sight of 230 feet/70 meters (no obstructions) keeps you up to date, with more stable transmission. Add thermometer to MOCREO hub as same as other MOCREO sensors and work together. Easily build your MOCREO system. Cares what you care for.
- Data storage/export: With data logger/ storage/ export on the MOCREO Cloud. Data history turns into a curve graph, offering you a clear data-changing track. Visualize the data.
What is a zwave freezer sensor?
The Z-Wave freezer sensor is a wireless smart sensor used to remotely monitor of the temperature inside a freezer, fridge or cooler. The sensor sends alerts and alarms based on user-specified temperature thresholds and measures the ambient temperature of the freezer or cooler.
The freezer sensor is designed to work with all Z-Wave certified home security or home automation systems that provide Z-Wave monitoring and control capabilities. The sensor is also compatible with all Z-Wave network controllers, including Panja and Aeotec.
How to use a zwave freezer sensor
A Z-wave freezer sensor allows you to monitor your freezer from any location and receive real-time alerts when your freezer door has been left open.
The presence of a freezer sensor in your smart home will not only help you manage your food more efficiently by allowing you to keep an eye on the temperature of your freezer at all times, it can also save you money by helping you prevent groceries from spoiling.
Simply place the Z-wave freezer sensor on the inside of your freezer and receive alerts when the temperature becomes too hot or cold. Additionally, the freezer sensor will send your Z-wave network real-time status updates and alert you when the freezer is open.
The benefits of using a zwave freezer sensor
A freezer sensor notifies you if the freezer has been left open and the temperature has risen. It will also send a text message to an emergency contact in case that you are unable to check your freezer right away, such as when you are away from home. When the freezer is unopened and working properly, the sensor will not send a notification.
Additional benefits include the following:
A freezer sensor monitors whether the freezer door is open or closed. You can program the freezer sensor to send a text message if the door has been left open for a given amount of time.
A zwave freezer sensor notifies you if the freezer has become too warm. It also sends a text message to an emergency contact in case that you are unable to check your freezer right away, such as when you are away from home. When the freezer is unopened and working properly, the sensor will not send a notification.
A freezer sensor can help you keep your food cold and fresh. It monitors the temperature inside your freezer and sends you a text message if the freezer becomes too warm. This can help you avoid food poisoning and other health problems.
How to choose the right zwave freezer sensor for you
To find the right zwave freezer sensor for you, it is important to evaluate your needs and current freezer setup. Here are some things to consider before purchasing a zwave freezer sensor:
1. Is The Sensor Compatible With Your Current Freezer?
The majority of the zwave freezer sensors available are designed to be compatible with the same brands and models. However, if you are unsure whether the sensor will work with your freezer or not, check the manufacturer’s website to find out.
2. Do You Need A Sensor That Monitors Your Freezer Temperature?
Some zwave freezer sensors are only capable of monitoring the temperature of a single freezer. If you have more than one freezer, or if you wish to monitor two different freezers at the same time, then purchasing a zwave freezer sensor with multiple sensors is an option.
3. What Type Of Sensor Is Best For Your Needs?
Many different types of sensors can be used in a zwave freezer. Temperature sensors are the most common, but humidity, pressure, and light sensors are available as well.
4. Do You Need A Sensor That Can Work With Other Devices In Your Home?
Zwave freezer sensors can be used in conjunction with other devices in your home. For example, if you have a zwave thermostat, then the sensor can be programmed to automatically turn on and off when the temperature in the freezer changes.
5. What Is Your Budget?
Zwave freezer sensors can range in price from $20 to $200. It is important to find a sensor that fits your budget and meets your needs.
6. Do You Need A Sensor That Is Easy To Install?
Some zwave freezer sensors are easier to install than others. Make sure to read the instructions carefully before attempting to install the sensor.
7. Do You Need A Sensor That Is Durable?
Zwave freezer sensors should be durable and able to withstand the elements. Make sure to check the warranty before purchasing a sensor.
The zwave freezer sensor is an essential part of any zwave home automation setup. By considering the factors listed above, you can choose the right zwave freezer sensor for you.
Why you should use a zwave freezer sensor
The Z-Wave Freezer Sensor is the easiest way to monitor a freezer up to 284 cu. Ft. (Eg. Full size upright freezer) and receive alerts when user defined temperature thresholds are exceeded. Install the sensor in the freezer, connect it to your Z-Wave network and you’re done. When the temperature rises above the normal operating range, an alert is sent to your smart phone, tablet or PC. The sensor also records the minimum and maximum temperatures, which can be viewed on a chart in the app. This is especially handy if you’re trying to figure out a temperature fluctuation that caused a problem.
Benefits of the zwave freezer sensor
● No wiring required!
● Use with many Z-Wave hubs such as Samsung SmartThings, Wink, Home Seer, Vera, Nexia, Fibaro HC2, and Trane
● Operates on 3 AA batteries for up to 2 years (avg use of 8-10 times per day)
● Fast, easy setup
● Elegant design fits in any kitchen
● LED indicator for temperature and battery alerts
● Use with other sensors such as door/window, motion, water, etc. to create your own smart home system
Details
● Dimensions: 1.3″ x 2.7″ x 0.7″ (H x W x D)
● Operating Range: -22 ~ 122°F
● Z-Wave Network range: Up to 150 ft. unobstructed
● LED status: Temperature, Battery
● Battery Life: Up to 2 years (Battery life based on 8-10 events per day, may vary depending on events per day and battery quality)
● Operating Temperature: -4 to 140°F
● Certifications: FCC, ETL, IC, CE
● Warranty: 1 Year
● Data Retention: Over 1 year
● Power Consumption: 5.4 mA
● Construction: ABS Housing, Stainless Steel Probe
● Package Weight: 0.03 kg
● Package Dimensions: 4.5 x 2.5 x 0.9 in
● Temperature Alert: -4℉ to 150℉
● Temperature Unit: °F & °C
● Storage Temperature: -4℉ to 140℉
● Battery: 3 x AAA 1.5V Alkaline
● Sensitivity: ±1.5°F (±0.83°C)
● Operating Humidity: 10% to 90% (non-condensing)
● Operating Battery: 3.0V CR2032 cell
● 2.4 Ghz Wifi: No
● Radio: Z-Wave Plus (Firmware 5.02 or later)
● Range: 150 ft.
● Current Rating: 2.6 Amps AC/DC