If you’re looking for a way to lock your washers in place, look no further than the Star Lock Washer. This handy little device will keep your washers from spinning out of control and making a mess of your laundry room.
Best 10 Washers Star Lock
![Hilitchi 400-Pcs [8-Size] 304 Stainless Steel External Internal Tooth Star Lock Washers Assortment Kit - Included: M2 M3 M4 M5 M6 M8 M10 M12](https://m.media-amazon.com/images/I/619hIto9UyL._SL160_.jpg)
- 【✔】High Quality Stainless Steel External Internal Tooth Star Lock Washers Assortment Set
- 【✔】Set Includes 8 Most Used Sizes: M2(2.5) M3 M4 M5 M6 M8 M10 M12 【Metric, please See Picture 2 for Specific Dimensional Size】
- 【✔】Made of 304 Stainless Steel Material, Very Good Corrosion Resistance, It Can Be Used in a Humid Environment
- 【✔】Package Quantity: 400-Piece, All of Washers Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
- 【✔】 A Lock washer exerts a spring force between the fasteners head and the substrate, which maintains the washer hard against the substrate and the bolt thread hard against the nut or substrate thread, creating more friction and resistance to rotation.
- Quality and strong standard type 400 series stainless steel
- Each pack is professionally heat sealed and labeled by Marine Bolt Supply
- Offered in convenient small or large quantity packs
- External Tooth Star Lock Washers: High Quality Stainless Steel External Tooth Star Lock Washers Set of 320 pcs, includes the most commonly used 8 sizes: M2.5: 50 pcs / M3: 50 pcs / M4: 50 pcs / M5: 50 pcs / M6: 50 pcs / M8: 30 pcs / M10: 20 pcs / M12: 20 pcs.
- Features: Internal Tooth Lock Washer Star exerts a spring force between the fasteners head and the substrate, which maintains the washer hard against the substrate and the bolt thread hard against the nut or substrate thread, creating more friction and resistance to rotation.
- Material: Made of high-quality 304 stainless steel environmentally friendly materials, high strength (not easy to deform), wear-resistant, corrosion-resistant, rust-resistant and oxidation-resistant. All gaskets will be packaged in a sturdy clear plastic box that can be used in a storage box.
- Applications: Widely used in a variety of screw fastening applications, ideal for electrical connections in household and commercial appliances, automobiles and ships.
- 100% SERVICE: We Promise the Premium Quality and the Best Service, If You are Not Completely Satisfied with Your Purchase Simply Let us Know.
- ♛ High Quality Stainless Steel External Tooth Star Lock Washers Set
- ♛ Set Includes 8 Most Used Sizes: M2.5 M3 M4 M5 M6 M8 M10 M12
- ♛ Made of 304 Stainless Steel Material, Very Good Corrosion Resistance, It Can Be Used in a Humid Environment.
- ♛ Package Quantity: 300-Piece, All of Washers Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
- ♛ Perfect for electrical connections on household and commercial appliances, automotive and marine uses in which the power source has a threaded/bolt-type connection
![260pcs[9 Sizes] Black Starlock Internal Tooth Lock Washers Assortment Kit, M2/ M2.5/ M3/ M4/ M5/ M6/ M8/ M10/ M12](https://m.media-amazon.com/images/I/41tkGfsvgOL._SL160_.jpg)
- 【√√】Product name: Internal Tooth Washers
- 【√√】Material: 65Mn Steel; √√Main Color: Black;
- 【√√】Package: 260pcs x Starlock Washer in one storage box
- 【√√】Include sizes: M2, M3 x 9mm, M4 x 12mm, M5 x 12mm, M6 x 16mm, M8 x 18mm, M10 x 20mm, M12 x 25mm
- Performance, quality, trust and value
- Precision, strength and dependability
- Designed and built to withstand daily use in the toughest work environments
- Package Weight: 1.55 pounds
- 【Sizes】M2, M2.5, M3, M4, M5, M6, M8, M10, M12 internal tooth star lock washers, total 9 sizes 360 pieces in a transparent box, different sizes can meet your different needs. Perfect accessories of shock absorption for machinery equipment. Easy to install and durable to use
- 【Material】High Quality 65Mn metal steel material which have good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and excellent oxidation resistance, which can ensure long time using.
- 【Function】Internal tooth star lock washers provide spring force, grip sturdy, create more friction and resistance to rotation between the fasteners head and the substrate, which maintains the washer hard against the substrate and the bolt thread hard against the nut or substrate thread, creating more friction and resistance to rotation.
- 【Wide Applications】Widely used in machinery equipment, industrial production of shock absorption, can meet your different needs in daily life. Whenever you need us, please free to contact us, we will give you a professional service and reply you within 24 hours.
- 【Package】360 pieces 9 sizes in total, packed in a durable transparent box with label. It is easy to distinguish the size of the product, when you want to use a certain internal tooth star lock washer, you don't have to waste time buying it separately, you can choose the suitable one to meet all your needs.
- 425 Piece Assortment
- Includes Sizes (#4 through 1/2)
- Type 410 Stainless Steel
- 9 Different Sizes
- Internal tooth star lock washers exert a spring force between the fasteners head and the substrate, which maintains the washer hard against the substrate, these push nuts can be used as a kind of automobile fasteners.
- Package included: 200pcs 5 sizes of M2, M2.5, M3, M4, M5 locking washers in a transparent plastic case-each size 40 pieces to meet different needs.
- High quality: 65Mn metal steel material, anti-corrosion and durable
- Function: Provide spring force, grip sturdy, create more friction and resistance to rotation.
- Wide application: These push nuts can be widely used in machinery, furniture, electrical appliances, electronic equipment, cars, sports equipment and industrial production of shock absorption and insulation.
How to Fix a Washing Machine That Won’t Turn On
The windshield washer fluid tank lid in a Lexus LS430 is secured by two screws located directly below the hood release lever. To access the screws, you will need to pry off the hood release lever using a small flathead screwdriver or pry bar. Next vacuum will allow you to remove any existing water. Remove vacuum will allow you to remove any existing water. With a small mm socket wrench, remove the two screws that secure the lid to the washer fluid reservoir. The washer fluid reservoir lid should now be removable from the vehicle. Remove washer fluid reservoir lid should now be removable from the vehicle.
Closezzle:
Cle your a flash bit of sandpaper and file down the area around the fluid nozzle. The washers are generally located in the back of the nozzle. You should see a small washer thin tab. out from the nozzle. Use your flathead screwdriver and push down on the tab until the washer falls out. If will want to keep this tab from getting stuck, as this will cause issues with removing and re-securing the nozzle. Re your small amount of lubricant, such as WD-40, and spray it onto the nozzle tip. This will make it much easier for the nozzle to slide out. Take a small amount of lubricant, such as WD-40, and spray it onto the nozzle tip. This will make it much easier for the nozzle to slide out. You you have lubricated the nozzle tip, you will be able to pull it out of the washer fluid reservoir with ease.
#IfDI_PDI_EA_Output_Engagement_Program. p program for Business# TDm#+l#rdm#rdm_simplel#rdm_dsch#rdm_sir
1 #m_yield capability#mt#mn#ml#danny#dms#nma#vk#tk#m#sq#mq#mqd#rdmd#mdm#mdm_dmmck#dt#dr#dkm#dtm#dwm#hw#hdm#hlm#hlm_squ#hp#dm#ml#dmk#md#mp#dmq#mh#mhd#im#mt#mlm#mdm#mhdmdm#mdm#mdm_dent#mhdm#mdm_lim#mhdm#ml#dmd#mdd#mm_enddm#mhdm#mn#dmd#mdm_e#dmi#mdm_diff#mdm_mq#mdm_mhdm#mdm_mhdd#mdm_mhdmdm#mdm_mhdmdm#mdm_mhdd#mdm_mhddm#mdm_mhdm#mdm_mhdhm#mdm_mhdm#mdm_mhddm#mdm_mhdmdm#mdm_mhdmdm#mdm_mhdm_m#mdm_mhddm#mdm_mhddm_m#mdm_mhddmdm#mdm_mhddmdm#mdm_mhdmd_m#mdm_mhdmdmdm_m#mdm_mhddm_m#mdm_mhdmdmh#mdm_mhd_m#mdm_mhdm_m#mdm_mhdmm#mdm_mhddmdm#mdm_mhdm_m#mdm_mhdm_m#mdm_mhd_m#mdm_mhddm_m#mdm_
How to Troubleshoot a Washing Machine That Won’t Fill With Water
You will need to remove the interior cover of the driver’s side of the dashboard by taking out these screws.
Next, disconnect the airbag connector and the hood release cable from the clock spring. You will need to do this for order to remove the clock spring.
Then we need to remove the pin to detach the clock spring. Once that, you can take out the clock spring by inserting a hand in the area shown below.
Now we have to take off the two nuts on the steering column to using a 10mm socket wrench. Then detach the windshield washer hose using a WD-40 lubricant.
Next, remove the nut holding the windshield washer motor onto the firewall using a 10mm socket wrench. Then detach the ground connector from the washer fluid reservoir and take out the reservoir. And is now time to slide out the windshield washer motor by detaching the two hoses connected to it.
Finally, install the new windshield washer motor by attaching the ground connector first and then putting two washer hoses. Then place the washer reservoir back in its place and attach the two hoses back to the reservoir.
You have to put back all in the reverse order that took them off including the washer motor in the firewall using a 10mm socket wrench. Now install the washer fluid reservoir back. you are using a 10mm socket wrench.
After that, we have to replace the two nuts that you took off earlier using a 10mm socket wrench. After that, we need to reconnect the ground connector to the washer fluid reservoir.
Connect the airbag connector and the hood release cable back to the clock spring. Then turn the clock spring until it clicks into place to lock it.
Then connect the pin back into the clock spring. Now replace the interior cover of the driver’s side of the dashboard by taking out the screws.
How to Fix a Washing Machine That Won’t Spin or Drain
If your washing machine isn’t spinning or your clothes are still soaking wet once the cycle is complete, you’re in need of a repair. Use how to troubleshoot and fix a washer that won’t drain or spin.
If your washing machine won’t drain or spin, you may have a broken part. Parts for both washers and dryers are available on the Sears PartsDirect website.
A washing machine that doesn’t drain or spin properly can also be caused by the lid switch, which tells the machine whether the lid is closed. If the lid switch is bad, the washer won’t spin or drain. If check the lid switch, you’ll need to remove the control panel. You, disconnect the power supply to the washer. Then, you’ll need to remove the screws that hold the control panel in place.
If the lid switch is defective, you may need to replace it. A faulty lid switch can also be caused by a defective drive motor or water inlet valve. If the lid switch is working, check the drive belt and make sure it’s not broken or loose. The drive belt connects the motor to the transmission. It’s also possible that your washing machine won’t spin if the drainpipe is clogged or kinked. You prevent future clogs, consider installing a lint trap for the end of the drainpipe.
If your washer won’t drain or spin, it may need a new drive belt. The check the drive belt, first, disconnect the power supply. Next, you’ll need to remove the cabinet. Once you you’s removed, you’ll see able to access the belts and other components.
‘s belt, reconnect the power supply and reattach the cabinet. The switch be replaced with the cabinet, so be careful when removing it.
Before replacing the drive belt, you’ll need to make sure that the motor pulley isn’t broken. To check the motor pulley, first, disconnect the power supply. Next, remove the cabinet. After the cabinet is removed, you’ll be able to access the motor pulley and other parts. If the motor pulley is broken, you’ll need to replace it.
If the drive belt is stuck with the cabinet, remove the cabinet carefully and replace it with a new one. Once the cabinet is replaced, reconnect the power supply and reattach the cabinet. If your washing machine still doesn’t drain or spin, you may have a faulty drive motor. If the drive motor isn’t working, you’ll need to replace it.
If replace the drive motor, first, disconnect the power supply. Next, remove the cabinet. Once the cabinet is removed, you’ll be able to access the motor and other parts. When’s replaced, reconnect the power supply and reattach the cabinet. If your washing machine still doesn’t drain or spin, it may have a faulty water inlet valve. If the water inlet valve isn’t working, you’ll need to replace it. To replace the water inlet valve, first, disconnect the power supply. Next, remove the cabinet.
How to Fix a Washing Machine That Won’t Agitate
If your washing machine won’t agitate, you may have a broken agitator. Agitators are parts that sit on the center of the washing machine’s top, bottom, or middle. They move back and forth to help the clothes get clean. When
1. Check for Damageages
Some washing machines start won’t spin or agitate until they’re completely full of water. This is because of a “star switch” on the lid of the washing machine. If the lid doesn’t close properly, the switch may the washing machine from agitating or spinning.
2. Check for Disinks
The agitator will have little bars all around it. If these get bent or broken and are inside uneven moved around, they can stop the agitator from turning. This could the clothes will get pulled to against the agitator and not against the machine.
3. Check the Tubings
The bearings or support wheels at the bottom of the machine can come loose and slip to grind against the outer drum of the machine. This creates a loud andaking noise whenever the drum revolves.
4. Check the Suspension System
The suspension system helps is often what holds the agitator in place. This system can become damaged and cause a agitator to stop working or moving. This is often damaged with the tub seal issue.
5. Check the Drive Bl
The drive hub is the spindle that connects the transmission of the motor to the agitator or inner tub of the washing machine. These can break down over time due to use or overloading.
6. Check the Trans-Drive Washing Machines
Direct-drive washing machines have a motor on the back of the washing machine that spins the inner tub. These motors can burn out and need to be replaced. These also add pul water weight to the back of the machine and can becomebalance the machine while it’s spinning.
7. Check the Belt
The belt on your washing machine can often be the culprit behind it’s if your washing machine won’t agitate or spin. If the belt is broken or wears, the washer won’t spin. Replace or repair the belt to fix the problem.
#
7———————————————————————————————
How to Troubleshoot a Washing Machine That Won’t Drain
If your washing machine won’t drain, there’s a chance that it’s clogged and not to be fixed. Before
Before you call the repair man, we’ll show you how to troubleshoot a washing machine that won’t drain to aid determine the problem.
1. Check The Washing Machine Drain Hose
The drain hose is the primary culprit for leaks and clogs. To doing any repairs, disconnect the supply line and check the drain hose for clogs.
2. Clean the Drain Hose
If the drain hose is clogged, you’ll need to clean it out. Start plumber’s snake hooked at a angle can reach deep into the drain hose to break up clogs. The drain hose isn’t easy to access, so you’ll need to pull out the washer.
If the drain hose doesn’t have any clogs, check ahead and reattach it to form if the issue is resolved.
2. Clean the Pumpashing Machine Drain Pump
The drain pump is another common cause of washing machines overflowing. When broken pump can usually be overheated or it can be broken, which prevents it from circulating water.
If the drain pump isn’t damaged, try cleaning it. Once again you access the pump, remove any debris that Clean you, reconnect the hose to test the machine.
If the washing machine drain pump is broken, you’ll need to replace it. Your washing machine user also overflow if the water level pressure switch is defective. The water level pressure switch is made to control the amount of water that’s allowed into the tub.
the water level pressure switch is defective, the water will get filled too quickly.
3. Check The Washing Machine Lid Switch
The washing machine lid switch is also referred to as a terminal switch. It ensures that the washer fills with water only once the lid is closed. If the lid switch is defective or fails in some way, it can prevent the washer from draining the water from the tub.
The lid switch is found near the door frame of the washer and it’s activated every time the lid is opened and shut. To check if the switch is broken, open and shut the washing machine lid. If the washing machine doesn’t turn on, the lid switch will need to be replaced.
4. Inspect The Water Level Control Valve
The water level control valve regulates the volume of water allowed into the washing machine. If this valve is defective, it can cause a washing machine to overflow. Inspect several valve regulate allowed’t been adjusted correctly, the washer may fill too quickly or too slowly.
To check if the water level control valve is defective, open the supply valves and check the washing machine fill with water. When the tub is filled to the desired level, shut off the valves. Recheck the water level again to determine if it’s correct. If the water level is off, you’ll need to adjust the water level control valve. If nothing washing machine overflows when the water level is set to, the water level control valve will need to be replaced.