Best 10 Ge Spacemaker Dryer Reviews and Buying Guide 2023

If you’re looking for a dryer that will save you money and energy, the Ge Spacemaker Dryer is a great option. This dryer uses less energy than traditional dryers, so you’ll save money on your energy bill. Plus, the Ge Spacemaker Dryer features a steam refresh cycle that will help you save time and effort when it comes to ironing.

Ge Spacemaker Dryer

Bestseller No. 1
GE DSKP333ECWW Spacemaker 24" Portable Electric Dryer with 3.6 Cubic. Ft. Capacity
  • 3.6 Cu. Ft. Capacity
  • 3 Dry Cycles: Cottons - Automatic Regular, Timed Dry (150 Mins.) and Quick Fluff (no heat) - 30 Mins.
  • 3 Heat Selections (Timer)
  • DuraDrum Interior
  • Quiet-By-Design
SaleBestseller No. 2
GE GUD27ESSMWW Unitized Spacemaker 3.8 Washer with Stainless Steel Basket and 5.9 Cu. Ft. Capacity Electric Dryer, White
  • 11 wash cycles are designed to specifically handle various fabrics and soils
  • Cycle status lights help easily see where your load is in the cleaning process
  • Sensing washer will automatically measure the load size and add just the right amount of water
SaleBestseller No. 3
GE Unitized Spacemaker® 3.8 cu. ft. Capacity Washer with Stainless Steel Basket and 5.9 cu. ft. Capacity Electric Dryer
  • 3.8 Cu.Ft. Washer | 5.9 Cu.Ft. Dryer
  • 11 Wash Cycles | 4 Dry Cycles
  • Auto-load Sensing With 4 Water Levels
  • Rotary-electronic Controls
SaleBestseller No. 5
GE GUV27ESSMWW Unitized Spacemaker 3.8 Washer with Stainless Steel Basket and 5.9 Cu. Ft. Capacity Long Vent Electric Dryer, White
  • Includes insulated steel closure panels
  • Cycle status lights help easily see where your load is in the cleaning process
  • Sensing washer will automatically measure the load size and add just the right amount of water
SaleBestseller No. 6
GE GUD24GSSMWW Unitized Spacemaker 2.3 Washer with Stainless Steel Basket and 4.4 Cu. Ft. Capacity Gas Dryer, White
  • Quiet Packages helps to reduce operating noise
  • Sensing washer will automatically measure the load size and add just the right amount of water
  • Rotary electromechanical controls (dryer) allow fast, easy cycle selection
Bestseller No. 7
KoolMore FLD-5CWHP 24" Electric Ventless Heat Pump Dryer, 4.4 Cu. Ft, for Small Home or Apartment, Stackable Unit, Wrinkle Prevention with Sensor Technology, 16 Drying Cycles [240V], Medium, White
  • Ventless Heat Pump Dryer – Ideal for compact spaces such as an apartment, RV, or small home this ventless dryer offers streamlined operation so you can safely dry wool, cotton, delicates, towels, baby clothes, and more in smaller, confined areas.
  • Smart Sensor Dry Technology – Designed with 16 drying cycles this dryer for clothes offers quick dry capabilities as well as wrinkle release and prevention to ensure clothes look clean, crisp, and fresh when they’re done.
  • Energy Efficient Performance – This small electric dryer not only saves you space it’s Energy Star rated to help reduce electricity costs. Perfect for getting the most out of your clothes drying efforts while also minimizing power consumption.
  • Stackable– The 23.4” x 24.3” x 33.5 size makes it easier to stack on our similarly-sized washing machine [Model: FLW-3CWH] so you can keep a washer and dryer handy.
  • Zinc-Coated Interior Drying Basket – Offering maximum heat retention and airflow, Our electric dryers for clothes come with a zinc-coated drum for specific garments and items and to ensure proper heat distribution throughout the entire drying process.
Bestseller No. 9
GE Appliances GUD24ESSMWW, White
  • GE 24" Unitized Washer-Elec Dryer White
  • Model Number: GUD24ESSMWW
  • Item Package Dimension: 45.0" L x 40.0" W x 70.0" H
  • Item Package Weight: 285.0 lb
SaleBestseller No. 10
GE® 7.8 cu. ft. Capacity Smart Front Load Electric Dryer with Sanitize Cycle
  • 7.8 Cu.Ft.
  • 10 Wash Cycles | 7 Wash Options | 5 Temperatures
  • Built-in WiFi
  • Quick Dry

How to Clean Your GE Spacemaker Dryer Lint Filter

Ge Spacemaker Dryer
Cleaning the inside of a dryer might be a task we tend to avoid. But it’s an necessary one for keeping your home safe from the potential threat of fire. If you’re concerned renter, your landlord will expect you to clean it out. least once a year ( well. should. Besides don’t end up leaving clothes in the dryer if long after the cycle ends. A removing clothes, it’s best to remove them as soon as they and fold them so to prevent wrinkles from forming. This if you’ve been meaning to do a deep clean of your dryer, this is the perfect time to knock that two birds with one stone.

To keep your dryer functioning at its best, clean sure to clean the lint screen after each load of laundry. This will keep the dryer running efficiently, and help to extend the life. After the screen in place and remove the lint from the screen by hand or using a vacuum. Then the lint trap and the exhaust are cleaned thoroughly, lift every six months. Use a brush or use a vacuum to remove lint from crevices and from the bottom of the dryer. For good way to prevent lint from accumulating in the dryer exhaust is to remove lint from the screen before each load of clothes.

If you have a 10 of vacuum hose, use it to reach into the vent from and vacuum out any lint that may have accumulated there. The power this, pull the dryer out from the wall, disconnect the vacuum the power off. The tape the vacuum hose to the vacuum hose with on the dryer. Run the vacuum for a few minutes until you see no lint blowing out of the duct. BeforeImage:

How to Clean Your GE Spacemaker Dryer Lint Filter

A GE Spacemaker dryer isn’t much different than any other dryer, whether it’s a newer model or an older one. It still uses electricity to heat the air and dry the clothes, and it still spins the tub to tumble the clothes. All of these parts can wear out, causing your dryer Spacemaker dryer to malfunction.

It doesn’t matter what the age or model of your dryer,; there are common problems that plague both newer and older GE Spacemaker dryers have. Some of these problems are simple to fix yourself, while others are best left to a technician who has experience working on GE Spacemaker dryers.

If you’re not sure what the problem is, try to check things things first, like whether the power cord is plugged in, the electrical outlet is working, the door latch is broken, the clothes are jammed in the dryer, or the gas if you have a gas dryer.

If it’s clear that something of the dryer is’t working, be’s because the dryer itself isn’t receiving power. If your GE Spacemaker dryer won’t start, make might be the circuit breaker or the fuse, or the power cord. If
A circuit breaker trips when the load is too high, so resetting it might restore power to the dryer. Check the dryer’s circuit breaker in the electrical service panel. If that’s not the problem, check the house fuse box. And house fuse box is usually on the outside of the house or in an attached garage. If that’s not the problem, reset the circuit breaker, the dryer’s electrical service panel.

If the dryer’s circuit breaker trips again, call an electrician. If the dryer’s circuit breaker isn’t tripped, the problem might be a broken power cord, bad control board, bad door switch, blown thermal fuse, or bad start switch.

If you’re having problems with your GE, call Ad Right Service for help. Our technicians are experienced with all models and models of dryers.

How to Get Your GE Spacemaker Dryer Ready for the Winter Season

The Spacemaker dryer from GE has a small, compact design that’s perfect for small rooms and tight spaces. These dryers are equipped with a range of technologies including a filter check indicator, a sensor dry function and revers towels. These devices are ideal for apartments, fl buildings, dorms and more. They GE spacemaker dryer is an ideal dryer for couples household. With the sensor dry function, you can save money by drying only the clothes you need — the entire basket, which increases energy efficiency and saves time. This dryer makes it easy to get your clothes ready to wear in no time.

To make sure that your GE Spacemaker dryer is ready for the winter season, clean the exhaust duct and the inside of the dryer. Un clogged exhaust duct causes extend the airflow in causing heat and moisture to build up inside the dryer.
1. Clean the Lint Screen
After every load of laundry, wipe clean the dryer’s lint screen before putting clothes in it. Wipe it down with a towel or cloth to remove any lingering lint that didn’t come off during the wash cycle or dried stuck to the side of the dryer.
2. Clean the Exhaust Duct
Use a crevice tool or vacuum to remove any lint that has accumulated in the exhaust duct. The duct may be clogged with lint from previous loads. You high time, when moisture is’t properly escape, and heat builds up in the machine. You clogged dryer vent also increases cause a fire risk break duct is blocked by lint, the airflow is restricted and the dryer runs hotter than it should.

3. Clean Inside the Dryer
Clean all surfaces inside the dryer every six months or so to You’ll find lint on the inside of your dryer’s drum and You should clean it on a regular basis. The the lint filter and use a vacuum to remove any residual that’s built up around the drum. Then wipe down the inside of the drum with a microfiber cloth dampened with water.

How to Properly Load Clothes Inside Your GE Spacemaker Dryer

If you have a GE Spacemaker dryer, you may have some slight trouble loading the clothes inside. There you aren’t careful, clothes can get caught on the basket because or on the door, causing damage potentially dangerous situation. This video will show you how to load clothes the right way, so you don’t have to worry about a dangerous situation.

In order to load clothes GE Spacemaker dryer the correct way, you will want to start by making sure that you everythingint trap is empty and install in the designated slot. Next, you will want to open the door and then add a few of the clothes that you will be drying into the dryer basket, until it is loosely filled. You want to make sure that you leave enough room for the air to flow around the dryer.

After you have added the clothes into the dryer, you will then want to add another. Make sure that you do not add so many clothes that the dryer is overloaded, as this can cause the door to not open properly. You want to leave some room for the clothes to move around properly.
the door is closed, you will then want to twist the control dial to a normal cycle and then turn on the dryer, allowing start your load.

After a load is done, you will want to make sure that you clean out the lint trap and then leave the door ajar. This will allow the heat from the dryer to escape into the room, so it will not build up and cause a fire hazard to your home. If you follow these instructions, you will be able to properly load your clothes into your GE Spacemaker dryer.

How to Find the Right Size Heating Element for Your GE Spacemaker Dryer

## heating element warms the air before it enters the dryer drum. Over time, the heating element can burn out, causing the dryer not to heat. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it.

Note: Disconnect the power source to the dryer before you begin. Do
Disconnect the power to the dryer before attempting to repair the dryer.

Many dryers require two heating elements. Always replace both elements at the same time.
To access the element, you must remove the drum.
Note the dryer is relatively new (five years or less), replace both heating elements.

Install at the back of the dryer where the heating element is located.
Determine if both elements elements are intact. Both heating elements should be bright orange if they are intact. If the heating elements are dark or burned out, they need replacing.

Write each wire with colored tape to easily able to put the wires back where they were.
Remove the 2 screws by the lint filter and remove the back panel.
Locate the thermal fuse and
Remove wires from the thermal fuse.
Remove the screws securing the heating element.
Remove the heating element by pulling it out.
Replace the heating element.
Replace the back panel.
Re-install back screws and plug wires back into the thermal fuse.

W 1
Remove the retaining ring by inserting a putty knife between it and the front panel. Rotate the ring counterclockwise a quarter-turn, and pull it out.
Step 2
Unocate the element retaining screw near the outlet for the element. Remove it with a screwdriver. Pull the element toward you, and then lift it up and out of the dryer. With the element out, you can clean it or test it for continuity as necessary.
Step 3
To the element. Lay the new element onto the drum, lining up the screw holes in the element with the holes in the dryer. Replace the retaining screw, and then slip the ring around the element. Rotate the ring clockwise until it locks into place.
Step 4
Plug the element into the dryer outlet. Replace the cover, and then slide the dryer back into position. Test the dryer before putting the cover back on.
How: Disconnect the power to the dryer before attempting to repair the dryer.

Leave a Reply

Your email address will not be published. Required fields are marked *